|
|
 |
APPLICATION |
 |
|
| Before assembling the retaining lugs on the rear end, the operator engraves them with this machine. He manually opens the drawer, positions the part into the tool, closes the drawer and presses the start button. The cycle runs automatically : the part is detected, fastened and the marking is conducted (It is impossible to open the slide during the marking as it is electro-magnetically fastened). It is released instantaneously and a light indicates that the cycle has come to an end ; the operator can then open and seize the part to fasten it onto the axle system. |
|
CONFIGURATION |
|
|
- Noise deadening sheet welded infrastructure
- Removable drawer with positioning system and locking system of the hitch-tongue.
- Cabinet with its PLC
- Pushbuttons and control lights
- I50 indent dot marking head mounted onto a standard column
- C98 controller with keyboard on a shelf
- Part sensor and closed drawer sensor |
|
| |
Material : I50 +
Noise-deadening cabinet
Start : June 2000
 |
TECHNICAL ZOOM |
 |
| |
Identified parts
• Steel axle bracket or rear end axle
Marking
• 7 incrementing figures :
- Height : 6mm
- Width : 3 mm
- Font 2.
Working speed
• 2 parts / minute
Noise level
• < 75 dB
|
|
 |
 |
 |
|
|
